Description
- 600 Volts
- Copper Conductors
- PVC / Nylon Insulated Singles Type THHN
- Sizes 16 Through 10 AWG
- Overall PVC Jacket
- Heat, Moisture and Sunlight-Resistant
APPLICATIONS
- Pro-Line’s Type TC Control Cable is for use in industrial power or control circuits where small diameter, flame retardant cables are desired
- Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire
- Type TC is also listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits
- Conductors may be used at temperatures not to exceed 75°C in wet locations or 90°C in dry locations
STANDARDS AND REFERENCES
Pro-Line’s Type TC Control Cable meets or exceeds the applicable requirements of the following standards and specifications:
-
ASTM – (All applicable standards)
-
UL 1277 – Electrical Power and Control Tray Cables
-
UL 1581 – Electrical Wires, Cables and Flexible Cords
-
ICEA S-58-679 – Control Cable Conductor Identification. (Method 1, Table 2 – colored compounds with tracer colors – excluding white and green)
-
UL 1685 – UL Flame Exposure Test (70,000 BTU/hr)
-
ICEA T-30-250 – Vertical Cable Tray Flame Test (70,000 BTU/hr)
-
ICEA T-29-520 – Vertical Cable Tray Flame Test (210,000 BTU/hr)
-
IEEE 1202 – Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies (70,000 BTU/hr)
CONSTRUCTION
Pro-Line’s Type TC Control Cable is available in sizes 16 AWG through 10 AWG, with multi-conductor constructions of 2 through 37 conductors. The product uses Type THHN or THWN conductors in sizes 14 AWG through 10 AWG. Individual conductors are bare annealed copper covered with a polyvinyl chloride (PVC) insulation over which a nylon (polyamide) or UL listed equal jacket is applied. The overall jacket consists of a heat, moisture and sunlight-resistant PVC. TC Control Cable shall be PRO-LINE WIRE & CABLE or approved equal.